 |
| Chilton DW-1 elevator spar coated with T-88 for the first plywood web |
 |
| Chilton DW-1 first elevator spar ply web clamped |
 |
| Chilton DW-1 Elevator spar showing the staggering of the ply web scarf joints over the intercostals. The stagger was similar on the other end. |
A tissue tracing from the spar webs verified the structural tracing. This is a an exercise in making work for myself. I traced the structure on what was to be the outside of each ply web. I also needed to trace this on the inside of the second ply web for masking for the epoxy varnish. Instead I had to make the tissue tracing of the structural tracing I had made on a spar web!
 Chilton DW-1 first elevator spar web finally masked, after transferring the structure with that tissue tracing! The ply and interior of the elevator spar have been coated with System Three Epoxy Clear Coat. |
Coated with System Three Clear Coat Epoxy and masking removed
No comments:
Post a Comment